If you live in an area where snakes frequently appear around your home or farm, learning how to build the most amazing snake trap in a hole using simple tools like iron cutting pliers can help protect your family and animals while allowing you to remove snakes safely. This method does not require expensive materials, and it is effective in catching snakes without harming them, making it a practical and humane approach.
To start, you will need iron wire, iron cutting pliers, a shovel, gloves, and a bucket. First, identify a location where snakes often pass, such as near stone piles, under sheds, or along fences. Carefully dig a hole about 1.5 feet deep and 1 foot wide. This depth ensures that the snake will not easily climb out once it falls inside, while being easy for you to manage.
Next, using your iron cutting pliers, cut several pieces of iron wire, each about 2 feet long. You will use these wires to create a funnel structure that guides the snake into the hole but makes it difficult for it to escape. Using your pliers, bend one end of each wire into a small hook, and push these hooked ends into the soil around the rim of the hole, pointing the wires inward like a funnel. This design will direct the snake toward the center while preventing it from crawling back up.
Make sure the wires are close enough so that the snake cannot easily slip back out but wide enough to allow the snake to enter naturally. You can also create a cover using light sticks and leaves, leaving a small open pathway where the funnel leads, to attract the snake inside without alarming it. The natural cover will make the trap blend into its environment, increasing the chances of catching the snake.
It is important to check the trap regularly, ideally twice a day, to ensure the snake does not suffer from dehydration or stress if left inside too long. When you find a snake in your trap, use a long stick or snake hook to safely transfer it into a bucket with a secure lid if you plan to relocate it to a safe place away from human activity.
The reason this snake trap made with iron cutting pliers is effective is due to its simplicity and the funnel structure, which plays on the snake’s natural tendency to move forward when it feels pressure from behind. The iron wires are strong enough to withstand the snake’s movements while being easy for you to adjust or remove when cleaning or resetting the trap.
This method is especially useful for people in rural areas where snake encounters are common, and it can be adjusted for different snake sizes by modifying the wire spacing and hole size. For larger snakes, you may need to increase the diameter of the hole and use thicker wire for stability.
Always wear thick gloves and boots when handling the trap or the snake to prevent bites, even if you believe the snake is non-venomous. Safety should always be your first priority.
In conclusion, building the most amazing snake trap in a hole made using iron cutting pliers is a straightforward and reliable way to manage snakes around your property. With a few simple tools, a basic understanding of snake movement, and consistent maintenance of your trap, you can effectively catch and relocate snakes without causing them harm while ensuring your surroundings remain safe. This DIY project is not only functional but also a valuable skill for those who wish to protect their environment responsibly while respecting wildlife.
Thank you so much for watching!
I hope you enjoyed this video and learned something new today.
If you liked it, please like, comment, and subscribe to support the channel.
Don’t forget to share with your friends who love DIY and nature adventures.
See you in the next video!
